Search - nand boot

[SourceCode] u-boot

Description: 我自己改的2410的u-boot，添加nand支持，可以引导linux和wce系统。
Platform: | Size: 11116887 | Author: xiao128 | Hits:

[ARM-PowerPC-ColdFire-MIPS] 2410loadGNU

Description: 2410 nand boot load!（4K DRAM) 0地址开始运行，没有象VIVI拷贝自身到高端内存运行，可以用它加载UBOOT。也可以改写它用来引导自己的系统-2410 nand boot load! (4K DRAM) 0 addresses begin, as VIVI not copy itself to high-end memory operation, can be used UBOOT load. It can also rewrite used to guide their systems
Platform: | Size: 76800 | Author: whwlxl | Hits:

[Other Embeded program] u-boot-1.1.6.st2410

Description: 调试通过的可以直接在NAND Flash 上启动的u-boot-1.1.6 (开发板：优龙st2410) 包括：cs8900网卡驱动，NAND Flash 烧写，NAND 环境变量保存（saveenv）, bootm, go, 网络下载tftpboot-debugging can be passed directly on the NAND Flash to initiate the u-boot-1.1.6 ( Plate : You Lung st2410) : cs8900 card driven, NAND Flash burning, NAND preserve the environment variables (saveenv), bootm, go, Download tftpboot network
Platform: | Size: 9320448 | Author: | Hits:

[Windows CE] Nwinceboot

Description: 基于nand flash的S3C2410的Winceboot项目工程源码-nand flash on the S3C2410 Winceboot projects FOSS
Platform: | Size: 114688 | Author: hsdb | Hits:

[OS Develop] x-load-h2.tar

Description: OMAP Linux NAND Boot Source code
Platform: | Size: 77824 | Author: zjg2001_79 | Hits:

[Embeded-SCM Develop] Nandbootload

Description: s3c2410的Nandflash的bootloader,参考wince的boot-s3c2410 the Nandflash Bootloader. Reference wince the boot
Platform: | Size: 144384 | Author: hb6106 | Hits:

[Other systems] Nandboot-SMDK2410

Description: 在U_Boot-1.1.6源代码基础上修改过的可以在hfrk的SMDK2410开发板上运行的U-Boot代码.-In U_Boot-1.1.6 source code based on the modified SMDK2410 in the hfrk development board running U-Boot code.
Platform: | Size: 6151168 | Author: gjc | Hits:

[Linux-Unix] NBOOT

Description: nand boot ,支持２Ｋ大页面的读写。-nand boot, support 2K great page to read and write.
Platform: | Size: 57344 | Author: 叶建江 | Hits:

[ARM-PowerPC-ColdFire-MIPS] uboot-s3c2410-nand.patch

Description: uboot-s3c2410-nand.patch.gz。 u-boot 1.2.0 NAND flash 支持。-uboot-s3c2410-nand.patch.gz. u-boot 1.2.0 NAND flash support.
Platform: | Size: 4096 | Author: ywc | Hits:

[Linux-Unix] backup.tar

Description: 上一次项目的vivi 代码，支持 tftp 传输，支持cs8900 网卡驱动，支持 nand启动-The last item vivi code, support for tftp transfer, support for CS8900 network card drivers to support NAND boot
Platform: | Size: 1580032 | Author: foo boy | Hits:

[ARM-PowerPC-ColdFire-MIPS] NAND_Boot_Code_v051108

Description: 三星 s3c2460 从k9f1208u0m NAND FLASH BOOT系统源代码-Samsung s3c2460 from k9f1208u0m NAND FLASH BOOT system source code
Platform: | Size: 215040 | Author: fuyi | Hits:

[SCM] 6400_BL_NAND_Rev02

Description: Samsugn 6400 NAND boot code
Platform: | Size: 54272 | Author: Coolio | Hits:

[Embeded Linux] u-boot

Description: u-boot1.2.0适用于2410开发板nand Flash-u-boot1.2.0 apply to 2410 development board nand Flash
Platform: | Size: 53248 | Author: ton | Hits:

[Linux-Unix] nand

Description: sbc2410 移植u-boot 1.3.4 的修改部分需要在borad/sbc2410x/Makefile 下添加编译nand.o -sbc2410 transplant u-boot 1.3.4 changes borad/sbc2410x/Makefile part of the need to add compiler nand.o
Platform: | Size: 8192 | Author: 曹某某 | Hits:

[Embeded Linux] u-boot-1.1.6_OpenJTAG

Description: 支持S3C24x0/yaffs/USB/CS8900/DM9000/OpenJTAG/Nor,Nand启动的u-boot 添加的功能： 1. 同时支持S3C2410和S3C2440 2. 支持串口xmodem协议 3. 支持USB下载，可以在PC上使用dnw传数据 4. 支持网卡芯片CS8900 5. 支持NAND Flash读写 6. 支持从Nor/Nand Flash启动 7. 支持烧写yaffs文件系统映象-Support S3C24x0/yaffs/USB/CS8900/DM9000/OpenJTAG/Nor, Nand start u-boot to add the functionality: 1. At the same time, support for S3C2410 and S3C24402. Support XMODEM Serial Protocol 3. To support the USB to download, you can use the PC on dnw Chuan-data 4. to support the network adapter chip CS89005. support for NAND Flash read and write 6. support from the Nor/Nand Flash boot 7. yaffs file system support programmer mapping
Platform: | Size: 126976 | Author: qin | Hits:

[SCM] HaiBIOS_S3C2410_v1.0

Description: HaiBIOS 是为我的S3C2410开发板写的一个启动程序。 C盘是RAMDISK，D盘是Nand Flash, E盘是 SD Card 默认是加载d:\MAINPROG.BIN到内存中运行，请修改LoadMain()以符合自己的需要。如果启动中检测到E盘根目录下有MAINPROG.BIN，将进入shell.方便用户烧写代码。-HaiBIOS is for my S3C2410 development board to write a startup procedure. C disk is the RAMDISK, D disc is Nand Flash, E disc is loaded SD Card is the default d: MAINPROG.BIN into memory to run, modify LoadMain () to meet their own needs. If the boot was detected E under the root directory MAINPROG.BIN, will enter a shell. User-friendly programmer code.
Platform: | Size: 289792 | Author: 长空飞雪 | Hits:

Category

Source Code

Web/Internet

Develop Tools

Document

Other

Search in results

OS

Platform

Language

File Type

Search list